How does runway slope affect takeoff ground roll?

As a standard aviation rule of thumb, each 1% of uphill runway slope increases required takeoff ground roll distance by approximately 7% to 10% for light piston aircraft, due to gravity resisting acceleration.

What is the maximum allowable runway slope under ICAO regulations?

ICAO Annex 14 specifies that the maximum longitudinal runway slope should not exceed 1.0% to 1.25% for primary commercial instrument runways (Code 3 and 4), and must never exceed 2.0% for any civil aerodrome runway.

ICAO Aerodrome Gradient Analysis

Runway Slope Calculator

Calculate longitudinal runway gradient percentages, evaluate elevation changes between thresholds, and check ICAO 2.0% maximum compliance.

Runway Elevation & Length Inputs

Runway Physical Length (Feet)

Departure Threshold Elev (ft)

Opposite Threshold Elev (ft)

ICAO Annex 14 Standard:

The longitudinal slope along any runway code number 3 or 4 should not exceed 1.0% to 1.25%, and never exceed 2.0% for any runway code.

Runway Gradient & Slope

1.2% Uphill

Elevation difference of 60 feet across a 5,000 ft runway.

ICAO 2% Compliance:Compliant (≤ 2.0%)

Takeoff Ground Roll Impact:

An uphill slope of 1.2% increases takeoff ground roll by approximately 12% (roughly 10% per 1% uphill slope).

Landing Rollout Impact:

An uphill slope aids deceleration and decreases landing rollout distance.

Luftfart

Explore more precision calculators to streamline your planning.

Luftfart Hub

Sidevinds- & Modvindsberegneraviation

Beregn præcise sidevinds- og modvinds-/medvindsvektorer ud fra magnetisk baneretning og vind.

Åbn beregner

Banenummer & Modbane Beregneraviation

Omregn magnetiske retninger til officielle ICAO/FAA banenumre, suffikser og modsatte baner i 180°.

Åbn beregner

Banelængde & Startpræstationsberegneraviation

Beregn trykhøjde, densitetshøjde og temperaturjusteret startstrækning med sikkerhedsmarginer.

Åbn beregner

Banesynsvidde Beregner (RVR)aviation

Konvertér RVR i meter og fod til sigtbarhedsmil og kontrollér CAT I, II og III minima.

Åbn beregner

Runway Slope Frequently Asked Questions

Everything you need to know about cash runway, burn rates, and financial planning.

Runway Slope (%) = (Absolute Elevation Difference between Thresholds ÷ Runway Physical Length) × 100. For example, a 6,000 ft runway with a 60 ft elevation change has a slope of (60 ÷ 6,000) × 100 = 1.0%.