How does runway slope affect takeoff ground roll?

As a standard aviation rule of thumb, each 1% of uphill runway slope increases required takeoff ground roll distance by approximately 7% to 10% for light piston aircraft, due to gravity resisting acceleration.

What is the maximum allowable runway slope under ICAO regulations?

ICAO Annex 14 specifies that the maximum longitudinal runway slope should not exceed 1.0% to 1.25% for primary commercial instrument runways (Code 3 and 4), and must never exceed 2.0% for any civil aerodrome runway.

ICAO Aerodrome Gradient Analysis

Runway Slope Calculator

Calculate longitudinal runway gradient percentages, evaluate elevation changes between thresholds, and check ICAO 2.0% maximum compliance.

Runway Elevation & Length Inputs

Runway Physical Length (Feet)

Departure Threshold Elev (ft)

Opposite Threshold Elev (ft)

ICAO Annex 14 Standard:

The longitudinal slope along any runway code number 3 or 4 should not exceed 1.0% to 1.25%, and never exceed 2.0% for any runway code.

Runway Gradient & Slope

1.2% Uphill

Elevation difference of 60 feet across a 5,000 ft runway.

ICAO 2% Compliance:Compliant (≤ 2.0%)

Takeoff Ground Roll Impact:

An uphill slope of 1.2% increases takeoff ground roll by approximately 12% (roughly 10% per 1% uphill slope).

Landing Rollout Impact:

An uphill slope aids deceleration and decreases landing rollout distance.

Flyg & Luftfart

Explore more precision calculators to streamline your planning.

Flyghub

Sidvinds- & Motvindskalkylatoraviation

Beräkna exakta sidvinds- och motvinds-/medvindskomponenter utifrån banriktning och vind.

Öppna verktyg

Bannummer & Motbana Kalkylatoraviation

Konvertera magnetiska banriktningar till officiella ICAO/FAA-bannummer och motbanor i 180°.

Öppna verktyg

Banlängds- & Startprestandakalkylatoraviation

Beräkna tryckhöjd, densitetshöjd och temperaturkorrigerad startsträcka med säkerhetsmarginaler.

Öppna verktyg

Bansynvidd Kalkylator (RVR)aviation

Konvertera RVR i meter och fot till siktmil och kontrollera minima för CAT I, II och III.

Öppna verktyg

Runway Slope Frequently Asked Questions

Everything you need to know about cash runway, burn rates, and financial planning.

Runway Slope (%) = (Absolute Elevation Difference between Thresholds ÷ Runway Physical Length) × 100. For example, a 6,000 ft runway with a 60 ft elevation change has a slope of (60 ÷ 6,000) × 100 = 1.0%.